Release Notes rvsEVO Version 6.02 Table of Contents ----------------- 1 INTRODUCTION 1.1 NEW FEATURES OF VERSION 6.01 1.2 NEW FEATURES OF VERSION 6.02 2 INFORMATION ON OPERATION SYSTEMS 2.1 LINUX 2.2 AIX 3 KNOWN BUGS AND LIMITATIONS 4 LIST OF CHANGES 1 INTRODUCTION ----------------- With this distribution you get the latest version of rvsEVO 6.02. For the patch level please see chapter 4 PATCH LIST of this document. Version rvsEVO 6.02 does not support every feature of rvsEVO 6.01 Please see chapter 3 KNOWN BUGS AND LIMITATIONS for more information. System Requirement: - Capable to run Java Runtime Environment 1.8 with Java Cryptography Extension (JCE) Unlimited Strength Jurisdiction Policy Files for strong encryption. - With version rvsEVO 6.02.05 onwards Java Runtime Environment 11 is supported and partly rvsEVO gets installed with Adopt Open JDK 11.0.4. A higher Java version as 11.0.4 can not be used, otherwise there might be disfunctionality. In case a higher patch level of Java is needed, then please use Java 8. Temporary Directory for Installer: - The rvsEVO installer uses a temporary directory to extract itself into and execute scripts needed during installation. Therefore the installer needs read, write and execute privileges for this directory. In case this is not given in the system default temp directory, the directory to be used can be set with the environment variable IATEMPDIR before running the installer. - More hints about workarounds in case of installation problems are listed in the Operator Manual (rvsEVO_Operatormanual.pdf). 1.1 NEW FEATURES OF VERSION 6.01 ----------------------------------- With version rvsEVO 6.01 following features are implemented: - Command Line Interface RVSCLI: command shell with complete rvsEVO feature coverage - Protection of the connection between rvsEVO and rvsOFTPProxy with TLS - Support of Windows 8 and Windows Server 2012 - View and Administration of CRL's - Automatic Download of CRL's during TLS Handshake - Automatic Renewal of TSL For the complete list of improvements and fixed bugs please see chap. 4 LIST OF CHANGES. 1.2 NEW FEATURES OF VERSION 6.02 ----------------------------------- With version rvsEVO 6.02 following features are implemented: - Multi-Tenancy - Support of Windows Server 2016 - Automatic restart of processing queues - UNIX/Linux: start script to run rvsEVO Server as background process Important restriction: - ComSecure is no longer supported and all ComSecure commands and paramters had been removed. Please use instead the OFTP2 security features. - For rvsEVO Server Java Runtime version 7 is no longer supported. Please switch to Java 8. For the complete list of improvements and fixed bugs please see chap. 4 LIST OF CHANGES. 2 INFORMATION ON OPERATION SYSTEMS ------------------------------------- rvsEVO 6.02 is available for the operating systems rvsEVO Server: Windows 8.1, Windows 10 Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 Linux zLinux UNIX rvsEVO GUI: Windows 8.1, Windows 10 Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 Linux (**)/(***) UNIX (***) In case rvsEVO Server runs on an operation system for which no rvsEVO GUI is available, please use rvsEVO Remote-GUI. (**) The RCP-GUI needs on Linux a preinstalled GTK (gtk-2.4). (***) On UNIX (or Linux without GTK) only the SWING-GUI is available (Start with /bin/startGUI.sh -swing) For hints about certain operations systems, please see following chapters. 2.1 LINUX ------------ In case the installer crashes with with a Java core dump please check whether environment variable AWT_TOOLKIT=MToolkit is set and unset it. In case of console mode installation it is necessary to unset environment variable DISPLAY in case no X-Server is available. On Red Hat Linux 6 and onwards the file .profile will not be executed anymore during login. rvsEVO uses .profile to set and export the environment variable RVS_HOME. Please set RVS_HOME after installation manually in .bashrc or .bash_profile instead. 2.2 AIX ---------- For AIX a JRE is needed with this patch level or higher: Java(TM) SE Runtime Environment (build 8.0.5.35 - pap6480sr5fp35-20190418_01(SR5 FP35)) IBM J9 VM (build 2.9, JRE 1.8.0 AIX ppc64-64-Bit Compressed References 20190417_414854 (JIT enabled, AOT enabled) OpenJ9 - 777635f OMR - 16b77d7 IBM - 72459d3) JCL - 20190409_01 based on Oracle jdk8u211-b25 3 KNOWN BUGS AND LIMITATIONS ------------------------------- EVO-1999 Observer: Schedule is missing EVO-2052 Self-defined conversion tables will not considered by update rvsEVO 5 to rvsEVO 6 EVO-2268 CMD: convertAndSend.bat/sh is not delivered anymore since version 6.00.00 EVO-2342 Installer: On AIX console mode installations treat Backspace/Delete keys as ^[[D/^[[C and lead to damaged configuration EVO-2405 OCSP: Global parameter OCSP-Proxy is not supported EVO-2438 Installer will hang on step 'Create default local station', in case HOSTNAME is not set EVO-3883 Java 7 as Runtime Environment for rvsEVO Server is not longer supported since version 6.02.00 EVO-3938 Feature "Distribution of Validation URI" is no longer supported since version 6.02.00 EVO-3947 ComSecure is no longer supported since version 6.02.00 4 LIST OF CHANGES -------------------- 03.12.2020 Changes from 6.02.05 zu 6.02.06 ------------------------------------------ Fixed bugs: EVO-5274 Error for import of a CA-Reply EVO-5278 Activate station did not reset the ConnectionSetupFailWaitTime EVO-5289 Changes for a station could have let to errors accessing this station EVO-5291 Configured maximum outgoing sessions had not been used and sometimes no outgoing session had been created at all EVO-5298 Remote-GUI: content of OUTBOX have not been displayed EVO-5304 RVSCLI: defect on HP-UX to query terminal width ("Failed to query stty columns") EVO-5310 AIX: new installation could have let to only partly filled parameter lists (table SYSTEM_CONFIGURATION) EVO-5319 WINDOWS: update installation without Administration privileges could have damaged existing EVO Server installation EVO-5351 Validation of file signature might have caused an error in case of multiple signatures EVO-5380 Error in dead session handling for TLS connections could have caused problems MAX-SESSION counter EVO-5382 TLS-Trace did not work for PROXY_TLS neighbour stations in case no entry was defined in host-alias.properties of rvsProxy EVO-5383 In problematic handshake situations PROXY_TLS listener could have been unreachable for an unacceptable time EVO-5388 Delivery of Format V files failed in case partner had sent wrong maximum record length in SFIDRECL EVO-5424 WINDOWS: jobstart-after-receive failed in case code conversion was used EVO-5428 Wrong EBCDIC character for code conversion ASCII-IBM273 for ASCII char '|' (hex 7C) was used EVO-5460 In case a partner had sent for a valid F_PDU indicator wrong F_PDU content it could have happened that wrong MAX_INCOMING_SESSIONS_REACHED condition had been reached EVO-5471 The wait time of an ERP job had not been increased in case of connection interruption after sending the ERP Improvements: EVO-3082 Observer: for same directory with overlapping filter definition same priority behaviour got introduced like known from jobstart EVO-5295 DOCU: description added how a higher JRE-Patch-Level on Windows and Linux can be applied EVO-5313 RCPGUI: selection in stationlist table is now synchronized with displayed station details EVO-5315 RCPGUI: certificate list shows now the serial number of the certificate (HEX und DEC) EVO-5317 RCPGUI: stationlist table shows for IP networks (TCP and TLS) the hostname EVO-5320 Routing: record length (SFIDLRECL) for Format U and T will to 0; by configuration it is possible to react with SFNA (rvs-system.properties: rvs_evo.protocol.format_u_t.restrict.record_length) EVO-5321 Jobstart-after-receive got extended with binary delivery for Format V files (VFBIN and VBIN_FTXT) EVO-5345 Commands in TOOLS directory: harmonization of return values and usage EVO-5341 TOOLS: command "exportUsers" got extended to export csv format EVO-5389 Remote-GUI: enabling of login with alias for hostname and port EVO-5409 Protection of rvsEVO JAR files in lib directory with JAR signature EVO-5410 Enabling of encrypted Oracle database connections with using SHA-256 EVO-5412 Enabling of restricted file transmission directions for OFTP sessions (SSIDSR; so far always B, now as well S or R) EVO-5422 rvsEVO Cluster: improvement of the behaviour during start of rvsEVO cluster node and restart of listener in case only one rvsProxy is used for all cluster nodes EVO-5445 LINUX: extension of rvsEVO.service template for systemd/systemctl for system start/stop routines EVO-5453 rvsEventTrigger: monitor log error message (ERR) TERMINATE_SENDJOB will create an error entry in the event table 14.04.2020 Changes from 6.02.04 zu 6.02.05 ------------------------------------------ Change of Java Runtime Environment (JRE): - The Installer delivers on the platforms Linux-64bit, Windows-64bit and Windows-32bit for rvsEVO Server the Java Runtime Environment Adopt Open JDK 11.0.4 - In case Adopt Open JDK cannot be started successful on these platforms, then instead Oracle Java 1.8 gets used - For rvsEVO Clients and Uninstall on these platforms additional Oracle Java 1.8 will be delivered and used (directory "jre8") - On the platform Linux-32bit always Oracle Java 1.8 is delivered for rvsEVO Server and rvsEVO Clients - On the platforms UNIX and zLinux it is recommended to use Java 1.8 - For Adopt Open JDK 11.0.4 it is not possible to use a higher patch level, otherwise rvsEVO might by dysfunctional - For Oracle Java 1.8 alternatively any higher patch level can be used, in case security restrictions makes it necessary - The deployed Java 1.8 JRE (directory "jre8") for the rvsEVO Clients and Uninstall should not be changed, otherwise the GUI might not be functional Fixed bugs: EVO-4886 In the rvs.log there had been unnecessary error messages for PRE_PROCESSING_QUEUE and POST_PROCESSING_QUEUE after 60 minutes of inactivity EVO-4892 After SFNA RETRY=Yes was sent and a partner station was sending before end of connection another SFID, then it got unnecessarily answered with SFNA RETRY=No EVO-4895 During update there was an error in case a configurered certificate contained in subject or issuer an UTF-8 character that was not XML conform EVO-4902 rvsEventTrigger: incoming ACX transmissions will not create an event anymore EVO-4906 Send jobs created with Observer did not contain a value for job parameter "Original File Size" EVO-4912 Creation of a CA Request did not work EVO-4916 Preprocessing with code conversion used for format F/txt the wrong filling character EVO-4923 Transmissions in format F/txt set after filling up of records the wrong value for "Original File Size" (SFIDOSIZ) and used the wrong value in SFID EVO-4937 After successful transmission files in directory EVO-files did not get deleted in case of NoCopy "yes" and Disposition "delete" and a EFID_GAP happended EVO-4940 RCPGUI: the creation of send jobs with upload of the file to rvsEVO server had let to an error in case the file was bigger than 2GB EVO-4971 DOKU Client-API: the mentioned dependencies had not been up to date EVO-4986 Malfunction because of double JobID's caused by setting back the operation system time EVO-4992 Observer: creation of jobs with preprocessing could have caused an error with reason "java.io.FileNotFoundException (permission denied)" EVO-4945 On recreate of a send job the value for "Retry" was taken from the original job instead of setting to 0 EVO-5008 Display of the job value "Time Start File" was wrong in case the rvsEVO Client was running in a different timezone as the rvsEVO Server EVO-5035 During migration from rvsXP or rvsX to rvsEVO there could be an error during processing because the parameter for No-Validation was not activated EVO-5048 The BASIC parameter "RMIServiceHost" was not effective, instead the RMI listener was always started on 0.0.0.0 (all IP's) EVO-5062 rvsEVO Cluster: the throughput went down continuously because ERP's had not been removed from the activity list EVO-5131 rvsEVO Cluster: maximum outgoing sessions to a neighbour station had not been respected EVO-5151 By Observer created ".gen" files could not been deleted by rvsEVO or manual by user in case of restart of the according transmission Improvements: EVO-4848 ACX: as response on a certificate request (without CLID in SFIDDESC) all valid certificates with default label will be sent to the requesting station EVO-4917 ACX: support of CLID (Certificate Logical Identifier) in SFIDDESC to identify the functional binding of a certificate (certificate label) EVO-5014 Certificate configuration: enabling of subject and issuer up to a maximum length of 2048 characters (up to now: maximum 255 characters) EVO-5028 GUI: display of job value "Time End File" EVO-5087 On creation of a send job it is possible to set the send priority of this job EVO-5108 The RMI connection between rvsEVO Client and rvsEVO Server can be encrypted with TLS EVO-5127 WINDOWS: the installation of the rvsEVO-GUI (Client-only) can be done without WINDOWS administrator privileges EVO-5135 Observer: serialization of send jobs based on alphabetic order EVO-5142 The RMI connection between rvsEVO Client and rvsEVO Server can be configured to be done by using ssh tunnels EVO-5147 New CMD command 'sendNext' for preferred sending of a job on the next available session EVO-5160 For partner stations it is possible to define the priority of a receive job from this station EVO-5166 New code conversion tables: ASCII-->IBM500, IBM500-->ASCII, ANSI-->IBM500, IBM500-->ANSI EVO-5190 rvsEventTrigger: Extension with new column "Priority" EVO-5205 For TLS connections a list of "denied-ciphers" can be defined EVO-5240 For migration from rvsXP or rvsX the values for SERCURITY and EERP_OUT are improved 20.05.2019 Changes from 6.02.03 zu 6.02.04 ------------------------------------------ Fixed bugs: EVO-3978 In rvs.log lots of ActivePanel error messages could occure EVO-4553 For send jobs the number of bytes of last DATA F_PDU had not been stored in the job data EVO-4584 rvsEVO installer resolved a root link instead of using the link itself EVO-4585 CMD command "getJoblist" could display date in wrong format EVO-4598 HP-UX,WIN32-JRE: malfunction caused by job dispatcher "Hazelcast" is removed EVO-4599 Fix of security leak: exploit could execute arbitrary commands on rvsEVO Server (Remote Code Execution) EVO-4641 for parallel calls the client login could have blocked until rvsEVO Server restart EVO-4644 GUI: the Live Monitor Log display could have freezed EVO-4667 On send attempts the element "Last Change" in job data had not been updated EVO-4697 GUI: it was not possible to delete Routing ERP's EVO-4700 Fix of security leak: exploit could achieve administrator priviliges within rvsEVO Server EVO-4811 Observer: blocked files in Observer directory could have let to crash of Observer Improvements: EVO-4162 Certificate configuration: the default label of a station gets removed as soon last certificate with default label gets deleted EVO-4220 Reception of transmissions with a VDSN that contains only space characters gets refused EVO-4327 ACX: in case of receiving an expired certificate a NERP will be sent to the originator and the certifiacate will not be imported EVO-4483 Observer will consume only a restricted number of threads EVO-4544 GUI: display of complete number and filtered number of stations in station table view EVO-4571 Compression level can be configured in rvs-systems.properties EVO-4575 CMD command "deleteJobsOlder" got provided with a mandatory parameter to avoid deletion of jobs by mistake EVO-4577 Observer ID got harmonized with Jobstart ID EVO-4578 GUI: in station tree view on filtering the found elements will show their subelements EVO-4590 Performance improvement for preprocessing and postprocessing by reducing file operations EVO-4593 Improvement of ActivePanel display EVO-4595 Usage of identical certificate for several partner stations possible EVO-4647 Reactivation of the routing behaviour implemented up to version 6.02.01 possible by configuration EVO-4653 New CMD command "showDnsCache" to display and cleanup the JAVA-DNS-Cache EVO-4657 ACX: for sending a certificate the one with newest valid-from date will be used EVO-4664 ACX: serial number and issuer get displayed in monitor log messages of ACX activities EVO-4679 Java DNS cache in rvsEVO Server: for DNS hostname resolution the default value of the Time-To-Live (TTL) parameter is set to 30 seconds EVO-4684 Certificate configuration: on import the default label will be suggested and is not needed to be provided by user EVO-4690 Commands in BIN directory: return values and usage got harmonized EVO-4696 In case of connection problems caused by "Active Station" the reason of the problem is displayed more profound EVO-4701 Routing send jobs remain in case of receiving a SFNA with RETRY=N in category ACTIVE to be restarted or deleted by user EVO-4707 Jobstart mit parameter handling ENVIRONMENT: new parameter for delivery filename without path EVO-4708 ACX: only possible to send certificates for which default label is set EVO-4716 ACX: no Jobstart gets triggered anymore for ACX transmissions EVO-4792 Improvement for detecting disk space shortage after reception of SFID EVO-4830 RVSCLI: improvement of column size of table views, particularly for 'listObservers' 26.10.2018 Changes from 6.02.02 zu 6.02.03 ------------------------------------------ Fixed bugs: EVO-4557 In case of backward system clock change there could be errors because of duplicate job ID's EVO-4558 rvsEVO Server did not start in case parameter "cluster.node.id" in cluster.properties contained an invalid value Improvements: EVO-4554 Plausibility check of OFTP time stamp on reception of SFID (disable with "rvs_evo.protocol.deactivate_sfid_datetime_check" in rvs-system.properties) 04.10.2018 Changes from 6.02.01 to 6.02.02 ------------------------------------------ Fixed bugs: EVO-2279 OFTP Routing: in case of EERP_IN=NEVER send jobs and receive jobs did not get put to state ENDED after reception of EFPA EVO-3577 In case of creating a send job with NOCOPY=TRUE deleting of the send job deleted the original file as well EVO-3881 For creation of file or response signature the certificate with the longest validity time had been used instead of the one with the shortest validity EVO-4338 rvsEVO Cluster: it was possible that for the same send job double SFID had been sent EVO-4340 Client login could be rejected with error message "INVALID_USERNAME_OR_PASSWORD" in case of big amount of operations even all login data had been correct EVO-4351 DOCU: the range of valid values for SFID counter was not quoted correctly EVO-4356 A backup created with parameter setting "BackupOnStartup" could not be used for the command "restore" to recover an installation EVO-4365 After an OperationTimeoutException it could have happened that jobs needed restart of rvsEVO Server to complete pre- and postprocessing EVO-4366 Reception of identical SFID within some milliseconds could have led to errors during jobstart after receive EVO-4368 TOOLS: rollback of importStationlist and importAllConfiguration did not work in case the definition of the local station had been faulty EVO-4370 GUI: during "Duplicate Observer" operation not all values got copied to the new observer definition EVO-4405 OFTP Routing: transmissions with identical VDSN in combination with forwarding to an OFTP 1.3 station (adaption of SFID_TIME) could got lost EVO-4428 rvs-system.properties: the support of the parameter rvs_evo.receive_job.ignore_jobstart_and_delivery_error did not work EVO-4450 OFTP Routing: during stop of rvsEVO Server forwarding EERP's could got lost and receive jobs remainded in status WF_EERP_ROUTING EVO-4453 GUI: in the job lists the sorting for "Send Attempts" and "Retry" did not work correctly EVO-4486 ACX transmissions had been rejected with SFNA in case for the partner station the parameter "File Encryption" was set to FORCED EVO-4503 rvsEVO Cluster: stop of one node could have let to stalled jobs that needed restart of the complete rvsEVO Cluster to get processed further Improvements: EVO-3881 Monitor-Log shows for pre- and postprocessing steps the serial number of the used certificate EVO-4092 TOOLS: new parameter for command "switchDatabase" to delete the content of the originating database EVO-4195 Revision-Log is written additionally in text format; the columns can be configured (rvs-systems.properties: rvs-evo.controller.archiveJob.txtLevel) EVO-4216 OFTP-Routing: Deleting of routing send job automatically deletes the related routing receive job as well EVO-4221 For a send job the Odette-ID of sender and receiver of the file are changeable until reception of EFPA EVO-4222 CMD command "deleteJobsOlder" got extended to choose between usage of creation time or last update time EVO-4288 None functional parameter "FirstLanguage" (group BASIC) got removed (language setting of Monitor-Log is done in rvs.properties) EVO-4328 Monitor-Log message in case of not found certificate got improved EVO-4330 GUI: the display of the serialnumber of a certificate got improved EVO-4337 OFTP-Routing: EERP's and NERP's get routed independently of the routing receive and send jobs (receive and send jobs get ended after reception of EFPA) EVO-4354 Definition of hostname aliases that get resolved by rvsEVO (new configuration file /conf/host-alias.properties) EVO-4362 GUI: the ordering of the job action commands in the context menu within the joblists got improved EVO-4369 Monitor-Log shows for SFID and SFPA messages now the restart position EVO-4379 CMD command "deleteJobsOlder" got extended for usage of status value "ALL" to delete jobs regardless of their status EVO-4381 New log file "sysinfo.log" with periodical information about the condition of rvsEVO Server like CPU usage, memory usage, number of active threads and other values EVO-4407 Monitor-Log: message SFIDTIME_CHANGED shows now complete OFTP transmission identificator EVO-4429 Improvement of the transmission performance for jobs with OFTP format U and jobs with OFTP2 file features EVO-4433 New function for automatic deletion of active jobs after amount of days after creation by setting parameters in group MAINTENANCE EVO-4485 rvsOFTPProxy: for DNS hostname resolution the default value of the Time-To-Live (TTL) parameter is set to 30 seconds EVO-4519 GUI: outgoing and incoming parallel sessions can be set to the maximum value of rvsEVO EE license (9999) EVO-4525 rvsEVO Cluster: securing of multiple rvsEVO Server startups as cluster nodes 09.04.2018 Changes from 6.02.00 to 6.02.01 ------------------------------------------ Fixed bugs: EVO-4079 Installer in mode "GUI Only" was missing to install some configuration files EVO-4154 Prevention of unnecessary max-session states by detection of inactive sessions (outgoing and global) EVO-4156 RCPGUI: auto-scroll of Live-Monitor-Log did not work in case filter had been set EVO-4157 RCPGUI: on creation of new station with final double-click error could turn up because of double execution EVO-4160 In case of NAT between rvsEVO and rvsProxy the function TLS-Trace did not work EVO-4163 During start of rvsEVO-Server restarted pre- and post-processing activities could not find the needed input files EVO-4170 During stop of rvsEVO-Server it could happen that EERP assignments and Observer send entries got lost EVO-4187 Monitor-Log: message CLEANUP_MONLOG_STARTED presented the period for cleanup wrongly EVO-4211 RCPGUI: automatic update of joblists after job actions did not work EVO-4229 RCPGUI: station tree had shown strange behaviour caused by unnecessary resets of view EVO-4235 Setting "SYNC" for station parameter "EERP_OUT" did not work for receiving of files for virtual stations EVO-4248 Renewal of certificates: during import of a CA-Reply the existing certificate got overwritten EVO-4254 CMD command "updateStationlist" did not work OFTP 1.2 stations EVO-4267 Invalid license key in case hostname was not in upper case or empty EVO-4291 Linux: on update installation in graphical mode together with wrong X11 configuration the instance could be damaged Improvements: EVO-4151 TOOLS: new commands for export and import of all configuration data (exportAllConfiguration, importAllConfiguration) EVO-4155 RCPGUI: assurance of compatibility with rvsEVO-Servers with the same feature version (no warnings anymore) EVO-4161 TOOLS: importStationlist and importAllConfiguration will perform a rollback in case of error EVO-4167 Monitor-Log: SFNA message extended with originator, destination, filename and date/time/counter EVO-4171 RVSRT: command "startgui" to start Multi-Instance-GUI has been activated EVO-4177 CMD command "getJoblist" extended for display of "File Description" (SFIDDESC) EVO-4178 RCPGUI and RVSCLI: job queries extended with field "File Description" (SFIDDESC) EVO-4183 Perfomance optimization and reduction of amount of database calls during creation of sendjobs EVO-4184 RCPGUI: in job queries the field "Send Attempts" got extended with bigger-as and smaller-than filter ('>','<') EVO-4186 Command "rvsver" has been moved from TOOLS to BIN EVO-4192 Revision-Log: field "File Description" (SFIDDESC) additionally as plain text EVO-4194 Monitor-Log: field "File Description" (SFIDDESC) gets displayed in SFID message EVO-4198 Polling cycle of Send Queue (for connection setup) is now configurable (rvs-systems.properties: rvs-evo.controller.sendqueue.polling.interval) EVO-4217 Linux/UNIX: protection of directory /tools: only the OS user doing the installation gets granted write privileges, not the group EVO-4244 EERP Signature: element EERPHSH now always gets filled in case EERP is signed 27.11.2017 Changes from 6.01.08 to 6.02.00 ------------------------------------------ New Features: EVO-3821 Multi-Tenancy (rvsRuntime) EVO-3985 UNIX/Linux: start script to run rvsEVO Server as background process EVO-4004 Automatic restart of processing queues EVO-4121 Support of Windows Server 2016 Fixed bugs: EVO-3866 CMD command importLicense: the end date of the new license had not been imported correctly EVO-3878 Jobstart with parameter handling REPLACE: placeholder parsing error corrected for singular question marks EVO-3880 Wrong value in SFIDSIZ for transmissions in format F and record mode BIN corrected EVO-3933 ISDN: MaxSession problem after ArrayIndexOutOfBoundsException during start of listener at the same time of incomming connection EVO-4009 RVSCLI on UNIX: error corrected in case jansi library can not be loaded EVO-4053 Transmissions with format U: end of file flag within the subrecord header had not been set correctly in case last subrecord length was exactly 63 bytes EVO-4061 RVSCLI: command generateKeyPair created wrong key usages and extended key usages EVO-4077 Remote Client: CMD command createSendJob could not upload local files to rvsEVO Server OUTBOX Improvements: EVO-3586 RCPGUI: job parameter 'Retry Count' can be used for job queries EVO-3830 Cleanup of Java DNS cache can be configured (rvs-systems.properties: rvs_evo.networkaddress.cache.ttl) EVO-3837 Default log level for rvs.log is changed from ERROR to WARN EVO-3843 Station configuration: Length of all contact parameters got harmonized concerning XSD, database and clients EVO-3884 Proxy RMI over TLS: command keytool extended to display valid-from and valid-to; documentation extended for handling expiration of the used certificate EVO-3889 rvsEventTrigger: events will only be written in case external job id is set EVO-3893 Automatic NERP sending on errors during file delivery and jobstart after receive can be suppressed (rvs-system.properties: rvs_evo.receive_job.ignore_jobstart_and_delivery_error) EVO-3941 rvs400 compatibility: EFID verfication can be suppressed (rvs-system.properties: rvs_evo.receive_job.ignore_illegal_efid_values) EVO-3951 Monitor-Log: display of progress during pre- and post-processing of big files EVO-3952 rvsOFTPProxy: English version of user manual provided EVO-3977 Parameter TlsCertificateValidationBehavior: same behaviour regardless of using uppercase or lowercase letters for the values EVO-4002 Parameter TlsCertificateValidationBehavior: Value 'DEFAULT' changed to 'PARTNER_CERTIFICATE_NEEDED' EVO-4030 Performance improvement for transmissions with code conversion but without OFTP2 security features (CMS) EVO-4055 TLS handshake: socket timeout can be configured (default: 15 seconds) Discontinuations: EVO-3883 Java 7 as Runtime Environment for rvsEVO Server is not supported anymore (Java 8 is needed) EVO-3938 Feature "Distribution of Validation URI" is not supported anymore EVO-3947 ComSecure is not supported anymore 07.04.2017 Changes from 6.01.07 to 6.01.08 ------------------------------------------ Fixed bugs: EVO-3793 License check could have let to en error during OdetteID control EVO-3794 Routing of files with OFTP2 security features (CMS) could have let to damage of the file EVO-3795 Generation of a NERP as reaction to receiving SFNA during routing could have create an incorrect SFNA reason code EVO-3796 License check for ISDN, XOT and Proxy-TCP did not work correctly EVO-3799 Command updateStationlist did not work correctly because of errors within the used XSD EVO-3806 Command backup: parameter "-f" did not work EVO-3810 Sorting of certificates for SID did not work EVO-3811 Sorting of Jobstarts did not work Improvements: EVO-3802 Job and Monitor Log Queries: Negation of filter definition with "!" EVO-3803 Job Queries: Relative date defintion "TODAY" EVO-3804 Improvement of error message in case already imported certificate gets imported again EVO-3812 RVSCLI: createSendJob mandatory parameters got reduced to "destination", "file" and "vdsn" 20.02.2017 Changes from 6.01.06 to 6.01.07 ------------------------------------------ Fixed bugs: EVO-3428 TSL-Auto-Update: Import will not be done just in dependency of TSL-NextUpdateDate anymore, but as soon new TSL is available EVO-3607 With line lengths longer 1024 OFTP2 preprocessing ran into ArrayIndexOutOfBoundsException for formats T, F/txt and V/txt EVO-3615 MAX_INCOMING_CONNECTIONS_REACHED: In case a caller had sent an unknown F_PDU instead of SSID the receiver blocked after reaching its maximum number of incomming calls EVO-3632 When creating many sendjobs with the same schedule time it could happen that not all of them got activated EVO-3646 In case a X.509 certificate contained in Subject or Issuer special characters there had been errors for export, import and update EVO-3656 HOLD command for sendjobs could have caused NullPointerExceptions, on which the session counter did not decremented and resulted in MAX_SESSIONS_REACHED EVO-3657 On interruption of transmissions after SFPA the aend attempts counter did not increment and jobstarts had not been triggered EVO-3660 RVSCLI: the command showMonitorLog ran into OutOfMemory error within the RVSCLI, in case it had been active too long during heavy traffic EVO-3661 Sendjobs with format F/bin could have caused EFNA with REAS=10 in case of certain combinations of buffer size and record length EVO-3701 Sendjobs with code conversion and OFTP2 security features only had been processed as long ASCII was set as input codetable EVO-3711 In case a sendjob got created in the very moment an already open session was in session wait situation, it could happen that even of EFPA a second send attempt got started which let to FILE_NOT_FOUND EVO-3717 rvsEVO-Cluster with shared rvsOFTPProxy: on crash of one node without signaling the command restartListener on the remaining node did not work EVO-3759 AIX/IBM-JRE: Error with TLS receiver (local and Proxy) in case partner only supported TLS version 1.2 Improvements: EVO-2499 Monitor-Log: ISDN/CAPI error codes shown together with error message text EVO-3614 Method tracing (paramters and processing time) for client calls on server side (activation in rvs-system.properties) EVO-3626 Reduction of transmission time for big files (from SFID to EFID) EVO-3638 GUI: the maximum value value for receiver parameter "Parallel Sessions" got increased from 99 to 999 EVO-3648 During import of XML files the BOM header added by some text editors gets recognized and ignored EVO-3685 Optimization of database requests for very big station and certificate lists (reduction of processing time for server start, client calls and TLS connection setup) EVO-3695 Configuration of private key only restricted to local station, virtual stations and stations configured as FSM INTERNAL EVO-3696 Odette-Trace: the list of stations can be configured at server runtime by using the GUI (parameter group ODETTE) EVO-3709 For receivejobs it is possible to suppress the deletion of temporary files in case of error (rvs-system.properties: rvs_evo.receive_job.keep_temp_files_on_failure) EVO-3737 Verbesserung der Uebertragungszeiten beim Empfang von Dateien im Format T ohne OFTP2-Sicherheitsmerkmale EVO-3757 Support of Windows 10 32-bit and 64-bit 23.06.2016 Changes from 6.01.05 to 6.01.06 ------------------------------------------ Fixed bugs: EVO-3495 Transmission of files bigger 2 GB with OFTP format F had led to wrong value in SFIDSIZE EVO-3500 SWING-GUI: Error in function to start and stop rvsEVO server EVO-3508 Error in Tool restore in case Proxy instances had been defined EVO-3517 Error in rvsEVO and Proxy during resetting rvsEVO to Proxy communication (resetBastion) EVO-3518 rvsEventTrigger: EFID-GAP messages had not been created in event table EVO-3519 In case of EFID-GAP the send job did not get removed from send queue and had caused FILE_NOT_FOUND error EVO-3525 After new installation in console mode and usage of external database the Spring profiles had not been set correctly EVO-3542 In case of many send attempts and from that triggered jobstart with action HOLD of the send job could have led to stale jobs in state QUEUED EVO-3572 rvs OFTP Proxy: memory increase in case of very many incoming connections fixed EVO-3573 rvsEVO Server: memory increase in case of many failed connections (incoming and outgoing) fixed EVO-3576 rvsEVO Server opened a listener port above 40000; now only during creating a TLS trace EVO-3579 Update installation: it could have happended that placeholders did not get replaced completely EVO-3584 Processing error in case file got received with originator Odette-ID of own virtual station EVO-3594 rvscli could not get used in combination with nohup Improvements: EVO-3483 CMD command getJob got extended for parameter -a to show number of send attempts EVO-3491 In rvs.log no longer WARN messages get written in case monitor log text gets truncated during writing to database EVO-3496 Tools for export of configuration data got extended to work at runtime of rvsEVO server even in case of DERBY database EVO-3497 Tool changeSID can now be used as well in case of Enterprise Edition EVO-3498 rvscli got extended with parameter -generateReport EVO-3504 rvs OFTP Proxy: logging of Java System Properties at startup EVO-3505 rvs OFTP Proxy: automatic test function to check the rvsEVO to Proxy communication (Remote-Callback-Handler) EVO-3534 Neighbor stations: alternative IP and port for the networks TCP, TLS, Proxy-TCP and Proxy-TLS EVO-3558 Monitor log message CREATE_SENDJOB got extended with the name of the file to send 29.03.2016 Changes from 6.01.04 to 6.01.05 ------------------------------------------ Fixed bugs: EVO-3492 Update installation was not possible for updates from version 6.01.02 or older (only updates from version 6.01.03 had been successful) 09.03.2016 Changes from 6.01.03 to 6.01.04 ------------------------------------------ Fixed bugs: EVO-3386 Installations on UNIX always configured German as Monitor-Log language EVO-3393 The tool switchDatabase changed the basic cluster setting EVO-3397 Jobstart FAIL didn't trigger in case post processing had run into an error EVO-3398 Update installation and the tool importQueries could damage query definitions EVO-3410 Even of OFTP Certificate Valdiation set to NONE, CA- and CA-Root certificates were needed EVO-3411 RCP-GUI didn't start on some Windows systems, in case JRE smaller 1.7 was preinstalled EVO-3417 rvsbat: parameter -ld and -le for setting the language didn't work EVO-3418 When migrating from rvsXP or rvsX to rvsEVO some combinations of characters could have let to an error EVO-3425 Parameter TSL Reference: old Odette-URI was used EVO-3452 CMD command handleEERP allowed to transmit NERP Reason Codes in the wrong format EVO-3461 Hazelcast tried Internet access to hazelcast.com (error correction for standalone setting) EVO-3463 Receiver could block incoming connections with MAX_INCOMING_CONNECTIONS_REACHED in case "Synchronized" was used for Jobstart EVO-3478 Files in outbox got deleted by accident in case filename did contain JobID of succesful transmission Improvements: EVO-2327 Station administration: SID can be changed by using the GUI in case no dependencies to Jobs and Certificates exist EVO-3316 TSL traces can be created for single connection attempts EVO-3326 On UNIX and Linux systems the tools importStationlist and exportStationlist could have created warn messages on console EVO-3371 On Windows it is now allowed to use space character within the installation path EVO-3372 On UNIX and Linux systems the installer checks initially whether the temporary directory that is used by the installer, has sufficient settings EVO-3409 Jobstart examples had been moved from bin/jobstart to docs/jobstart-examples EVO-3416 New tool changeSID that allows changing SID when rvsEVO server is stopped, even in case dependencies Jobs and Certificates exist EVO-3424 Installer for UNIX and Linux are now delivered as GZIP files EVO-3426 CR (Carriage Return, 0x0D) is now allowed as business content for format T files EVO-3434 CR (Carriage Return, 0x0D) is now allowed as business content for format F and V files EVO-3436 RCP-GUI: wording in the message boxes for job actions got improved 23.11.2015 Changes from 6.01.02 to 6.01.03 ------------------------------------------ Fixed bugs: EVO-3188 Linux: Installer not always filled the placeholders correctly EVO-3263 Format F: Size of file on disk was used in SFID, not the real transmission size EVO-3350 CERT-PATH validation went wrong, in case CA-Root was a X.509-V1 certificate EVO-3357 Error after Update installation from rvsEVO 5 to rvsEVO 6, in case jobs had been in state SP_ENDED EVO-3363 Receiving of 0 byte files in format T, F or V failed during delivery EVO-3364 Code conversion failed in case rvsEVO server was running as Windows service EVO-3365 Sending with format F/txt had let to record filling with NULL instaed of spaces, in case OFTP2 file features had been used EVO-3421 rvscli: updateJobstart did reset parameters that had not been handed over in update command back to default values Improvements: EVO-3264 New CMD command deleteJobsOlder which can be used to delete jobs with relative date parameter EVO-3266 Usage of relative date and time filter in job queries (e.g. "older than 3 days") EVO-3305 Support for using MSSQL as database server EVO-3310 rvsEVO on Windows Server 2012 R2 and Windows 8.1 does not need to be installed in "Windows7 Compatibility Mode" anymore EVO-3317 New CMD command to change the used database system (tools/switchDatabase) EVO-3318 New API function for notifications on jobstart events EVO-3341 Jobstart: enabled to hand over own parameters to called script 04.08.2015 Changes from 6.01.01 to 6.01.02 ------------------------------------------ Fixed bugs: EVO-3218 rvsEventTrigger: SE_CREATED event was missing in case Job was created as SCHEDULED EVO-3219 rvsEventTrigger: HOLD event was written to early into event table EVO-3226 rvsEventTrigger: event table was not filled anymore since verison 6.01.00 EVO-3274 rvscli: list views didn't work on UNIX EVO-3275 rvscli: element "Client Authentication" of TLS and Proxy-TLS showed wrong values EVO-3276 rvscli: inconsistency of naming in Receiver cleaned ("Ordinal Number" now always "Receiver Number") EVO-3278 Receive jobs for automatic certificate exchange (ACX) stayed in status EERP_RELEASED EVO-3279 Usage of SWING-GUI could have led to deletion of content of "Default Label" and "Certificate Usage" EVO-3283 Jobstart script with parameter handling REPALCE had not been completely executed in case it contained an odd number of question marks EVO-3294 Job status EERP_HELD had been set before file got delivered EVO-3285 In case of file routing a possible SFNA reason code had been not mapped to correct NERP reason code Improvements: EVO-2981 rvsEventTrigger: timeOftpRcv and timeOftpRcvEnd set now as well on local send/delivery EVO-3215 Automatic determination of maximum record length for file format V EVO-3216 Extension of job data with element retry count (retryCount) and time of first send attempt (timeFileFirstStart) EVO-3220 rvsEventTrigger: receiverPhysSid and originatorPhysSid set now as well on local send/delivery EVO-3221 Function "Activate Station without Transfer" added to GUI, CLI, API and CMD tool "activateStation" EVO-3223 Pre-processing step OFTP-Conversion accelerated mainly on SunOS EVO-3236 Station management: element "Remark" added to stationlist display EVO-3247 Import of a license without server stop with new CMD tool "importLicense" EVO-3286 rvsEventTrigger: for ESID with error code and JobID an event will be created 18.05.2015 Changes from 6.01.00 to 6.01.01 ------------------------------------------ Fixed bugs: EVO-3121 The max session counter for a neighbour station was not handled correctly in case during connection attempt to this station the global max session limit had been reached EVO-3126 The hold operation for a serialized send job did not work EVO-3198 rvsOFTPProxy installation: the configuration of TLS for the RMI connection during installation did not work on Linux EVO-3208 Installation: in case of errors during the call of the DB tools, the error message was to huge (buttons had not been visible) Improvements: EVO-2859 For UNIX a local GUI with basic functionality is available EVO-3137 The send job attribute "Size of Original File" (LengthOriginFile) will be now already filled during creation of the send job EVO-3187 GUI: it will be tried several time to connect to server in case of connection errors EVO-3196 The CMD tool importKeys.sh/bat created unnecessary WARN messages EVO-3202 The configured OFTP level for a neighbour station will be recognized even when the partner is creating the connection EVO-3203 On connection error the configured hostname and as well the resolve IP will be included in the error log 09.04.2015 Changes from 6.00.08 to 6.01.00 ------------------------------------------ New Features: EVO-2153 Support of Windows 8 and Windows Server 2012 EVO-2817 Automatic Renewal of TSL EVO-2970 Protection of the connection between rvsEVO and rvsOFTPProxy with TLS EVO-3012 Automatic Download of CRL's during TLS Handshake EVO-3046 View and Administration of CRL's EVO-3168 Command Line Interface RVSCLI: command shell with complete rvsEVO feature coverage Fixed bugs: EVO-1735 rvsOFTPProxy 6 : Proxy backup does not work EVO-2435 JobDetails of FAILED Job: Show Error is without content EVO-2462 Date and Time display in Active Panel was not formatted EVO-2856 API: it had been possible to add a second local station EVO-2986 During import of a TSL the Distribution URI's had been set wrongly EVO-3022 Restart of rvsOFTPProxy (Reconnect) could have let to erros on restart of the Proxy Listeners EVO-3046 Monitor Log column "Instance" will not added any more EVO-3057 Error during serialized sending with OFTP2 file security in case of big files EVO-3077 GUI in Remote Mode created during upload of files unnecessarily empty files in outbox of server EVO-3083 Deleting a station with active jobs have let to problems during startup of server EVO-3093 Reception of EERP that could not assigned to a transmission could have let to high CPU consumption EVO-3133 Protocol Gateway 2.0 to 1.3: files with equal VDSN could have let to SFNA with "Duplicate File" EVO-3142 OFTP Timeout after ESID reception did not close the rvsEVO internal Session: Counter had not been decremented and Session was still visible in Active Panel EVO-3155 tools/importStationlist -c: Certificate Assignment and Usage Definition had not been recovered Improvements: EVO-2774 CMD: On activating a neighbour station a temporary OFTP send password can be set EVO-2899 Script trigger on defined number of rvsOFTPProxy CONNECTION_CREATE_FAILURE messages EVO-2874 GUI: Jobstart filter allow now "?" as additional filter character EVO-2897 Observer extended for support of OFTP2 SFID element File Description EVO-2987 GUI: filter function for all tables (e.g. Jobstart, Certificates,...) EVO-2993 rvsEVO Installer for Windoes and Linux installs Java 8 JRE EVO-3021 UNIX/Linux permissions can defined for temporary created Jobstart scripts EVO-3047 GUI: expired Certificates get displayed in red EVO-3065 ISDN: prevention of wrongly configuring in case of plattforms that don't support ISDN (Win-64bit, Linux, UNIX) EVO-3075 GUI: copy function (duplicate) for object User and other objects EVO-3078 Passwort of rvsEVO Default User can be changed EVO-3094 RVSBAT: command to create a send entry is extended with option '-nocopy' EVO-3140 Deleting a Station is prevented in case there are active SendJobs EVO-3150 Monitor Log and all rvs log files show date and time in ISO-8601 format EVO-3153 Certificate Index is set now as well for CA and CA-Root Certificates 18.02.2015 Changes from 6.00.07 to 6.00.08 ------------------------------------------ Fixed bugs: EVO-2730 For file upload and download the configured port was not used EVO-3080 Data access to stationlist returned the wrong data (example for SID: AAX & AB9) 26.01.2015 Changes from 6.00.06 to 6.00.07 ------------------------------------------ Fixed bugs: EVO-2968 Format F/txt and V/txt files had not been transferred correctly in case CR was last character of a record EVO-2992 LDAP validation URI caused error messages in case of CRL validation EVO-2997 Wrong default value for callback heartbeat could cause interruption or EVO-Proxy connection EVO-2980 CA certificates with double serial numbers caused errors after update EVO-3043 Stations with OFTP exchange buffer credit < 128 could not being saved Improvements: EVO-3037 Signature algorithm can be chosen during creation of private key (necessary for SHA-2 CA's) 18.09.2014 Changes from 6.00.05 to 6.00.06 ------------------------------------------ Fixed bugs: EVO-2866 GUI: Display of certificate details showed hex value for serial number not correctly EVO-2869 Monlog in DB: Log entries that had been longer than 255 characters had not been persisted EVO-2890 API: send jobs with wrong INIT time did not get processed without error message EVO-2896 Connection setup to available station got disturbed in case send attempts to not available station had been made EVO-2917 rvsbat RESENTR/CREATE parameter NEWDIR was not supported EVO-2919 In case of queued send jobs for not available station it was possible that multiple attempts happened without concerning SessionWaitTime EVO-2927 Detection of double transmission did not lead to SFNAREAS=13 (Duplicate file) EVO-2934 CMD-Tool downloadCRLs did not work EVO-2942 Counter send attempts got increased, even no connections attempts had been made because of activeConnectionSetup=No Improvements: EVO-598 GUI: Combo boxes allow filtering of displayed selection list EVO-2574 Release for Windows Server 2012 EVO-2789 During update installation a backup copy of rvsLogger.xml will be created EVO-2809 In case of transmission of very big files to OFTP1 neighbours SFIDSIZ will be set to 9999999 EVO-2871 CMD-Tool importTSL is extended with parameter -o to download Odette-TSL EVO-2903 TLS Perfect Forward Security (PFS) is enabled EVO-2904 TLS Version 1.1 und 1.2 is enabled 03.07.2014 Changes from 6.00.04 to 6.00.05 ------------------------------------------ Fixed bugs: EVO-2888 GUI: It was not possible to create a sendjob, because SID (or OID) could not be selected 23.06.2014 Changes from 6.00.03 to 6.00.04 ------------------------------------------ Fixed bugs: EVO-2382 Resource check for certificates (validity period) does not check certificates that are not assigned to a station EVO-2735 Server could not start in case long key was in keystore but strong security (JCE) was not activated EVO-2790 Number at first position of SID was not possible EVO-2791 CMD-Tool updateStationList: Function update did not perform create in case did not exist EVO-2792 CMD-Tool updateStationlist: Use of -su and -sp has led to error EVO-2812 GUI: ScheduleTime/INITTIME was not shown EVO-2843 API: SendDetails default values MaxRecl=89 and Format=U has led with some partners to SFNA EVO-2857 API example program CreateNeighbourStation did not work EVO-2861 Windows-64bit: rvsEVO Server did not start as Windows service Improvements: EVO-2470 Validation URI got extended with Type (CRL,OCSP) EVO-2764 Context menu on local station to create listener EVO-2782 rvsEventTrigger: Message on reception of EERP before EFPA(EFIDGAP) EVO-2783 Local delivery without LooptestNeighbour made possible (LFPA & LERP) EVO-2784 Sendjob can be created using Odette-ID EVO-2785 rvsEventTrigger: External JobID added EVO-2795 User Roles: Operator does not have the permission anymore to change Private Key EVO-2796 CMD-Tool getStationlist added for showing XML style stationlist EVO-2814 GUI: ExternalJobID can be declared as mandatory by user configuration EVO-2810 importTSL added in bin directory as client tool EVO-2815 Remote-GUI: SendJob can be created from local files system of client EVO-2827 rvsEventTrigger: HOLD/RELEASE of jobs added to rvsEvent trigger EVO-2828 GUI: Online Help added EVO-2832 rvsEventTrigger: TimeEndFile available as soon monlog entry EFPA is written EVO-2835 GUI: virtual Stations can be addressed as destination EVO-2845 SHA algorithms extend with SHA-256 and SHA-512 06.05.2014 Changes from 6.00.02 to 6.00.03 ------------------------------------------ Fixed bugs: EVO-2081 Upload File required connection from server to client and used port was not predictable EVO-2432 Creation of private key: Additional information (OdetteID, Hostname) are not contained in the certificate request EVO-2451 In case of OFTP-Timeout during SFID handling send jobs need manual restart EVO-2472 Live Monitor Log did not show last line EVO-2728 CrlLocalAddress did not work EVO-2735 Server startup failed in case long key was configured, but without JCE string encryption EVO-2740 Error during sending with observer and format T EVO-2746 CRL-Download using rvsOFTPProxy had led to errors EVO-2748 rvsEventTrigger: Change of Monitor Log date format had led to parsing errors EVO-2773 Sending of EERP had been still tried after deletion of EERP (delete-forced) Improvements: EVO-2662 rvsEventTrigger: NERP REAS is included EVO-2729 CMD-Tool downloadCRL logs all activities to Monitor Log and errors to console output EVO-2733 CRL-Validation: Monitor Log shows whether CRL was available (otherwise: WRN: CRL_NOT_FOUND_IN_CRL_STORE) EVO-2739 Automatic cleanup mechanism for Monlog-In-DB EVO-2762 ACX: Selection of own certificate now using Index instead of Label EVO-2775 TLS-KeystoreParameter: Automatic detection of available KeyManagerAlgorithm 24.02.2014 Changes from 6.00.01 to 6.00.02 ------------------------------------------ Fixed bugs: EVO-1797 Security=Forced is not working with ComSecure EVO-1900 In case of SSIDSDEB=0 send jobs will run in FATAL_ERROR EVO-2060 5.04-BR: DeleteJob -forced does not work for jobs in status WF_SFID_ANSWER EVO-2070 5.04-BR: SFID VDSN-Check: Underline shall only be accepted for ACX transmissions EVO-2071 5.04-BR: Import Certificate: Error messages need improvement EVO-2076 5.04-BR: Migration of Portable Station List: Start counter of card numbers are different (Portable=0, rvsEVO=1) EVO-2094 5.04-BR: PROXY: Monitor log message "LISTENER_RESTART_SUCCESS" is turning up after "LISTENER_FAILURE" for every HeartBeat EVO-2097 5.04-BR: Observer and OFTP1.3: SFNA because of problems with timestamp EVO-2100 5.04-BR: Allowed characters for OdetteID shall be extended with underscore '_' EVO-2101 5.04-BR: ESID with Protocol Violation needed in case Odette-Buffersize of partner is smaller than allowed value EVO-2281 JC011 : VDSN character check is missing EVO-2322 SendJob: Function Recreate is not working EVO-2474 Backup during startup is not working EVO-2578 In case of delays during TLS handshake the listener is too long not available EVO-2579 In case jobstart after receive runs into an error the received file gets deleted EVO-2599 Errors in certificate check can cause the server to abort the start of the server EVO-2601 ComSecure: error during postprocessing in case more than one certificate are configured EVO-2676 Sender IP is not set correctly for networks TCP, TLS, Proxy-TCP and Proxy-TLS Improvements: EVO-1826 Rework on Revision Log and Cleanup avoids memory problems during archive (revision log now when ENDED or FAILED reached, cleanup just deletes database entries) EVO-2380 Number of lines in Live Monitor Log can be configured EVO-2487 View of Monitor Log files as table with filter function and select and copy possibilities EVO-2558 rvsbat ignores case for parameter names and most values EVO-2591 In case of ISDN error a delay time will be waited to avoid ISDN router problems EVO-2521 Order of sending files and responses is now concerning the creation time of the job EVO-2630 Number of ISDN sessions can be restricted EVO-2632 Remote-GUI: Login window shows list of last successful logins for selection 03.12.2013 Changes from 6.00.00 to 6.00.01 ------------------------------------------ Fixed bugs: EVO-2050 5.04-BR: CMD: updateStationList returns 0, even if an error occurs EVO-2086 5.04-BR: ACX and Security=Forced is not working (SFNA-Error "Reason=17 Unencrypted file is not supported") EVO-2170 Installer: during update changes made by the user in setcp.bat and rvsservice.ini are not saved EVO-2216 ActivePanel is not working completely EVO-2217 Monitor log: TLS_SERVER_CERTIFICATE_INVALID does not have enough parameters EVO-2344 ComSecure encryption is not working on AIX EVO-2350 updateStationList.sh is not working EVO-2439 Installer: license.properties was not cpied into conf directory EVO-2442 On Creation of a new observer it was not possible to edit record length for format F and V EVO-2476 Error message was missing in case a TLS could not start because of missing private key EVO-2508 Jobstart with parameter handling REPLACE: parameter DTRCV and RVS_LAST_CHANGE had wrong values EVO-2518 ComSecure: configuration of certificate handling was not taken into account EVO-2520 Migration rvsX/rvsXP to rvsEVO: OK lines with douple quotes had led to error EVO-2526 GUI: in Active Panel the columns LineSpeed and Progress had been exchanged EVO-2539 Migration rvsX/rvsXP to rvsEVO: for RE entries the parameter Delivery Filename was not treated correctly EVO-2549 OFTP1.4: on reception of NERP sendjobs stayed in status WF_EERP EVO-2551 Installer: on Linux and Unix the installer placeholder had not always been replaced Improvements: EVO-1428 GUI: Function for navigation from Gateway to Routed Stations added EVO-1571 XML station management extended with new field Label for external coupling; not visible in GUI EVO-1729 rvsbat: error messge improved for unknown parameter EVO-2043 5.04-BR: Creation of send entries: VDSN shall not allow underscore (_), as this might lead to problems with routing and destination stations EVO-2062 5.04-BR: in case of errors during decryption or signature verfication the error message will contain information about the used key EVO-2436 Observer: VDSN can deal with * as wildcard for segments (divided by dot ".") EVO-2441 Installer: Check of input values EVO-2466 Monlog: Log line for CRL auto update task EVO-2469 Monlog: Log line of certificate validation extended EVO-2487 GUI: View of Monlog file: extended for searching and marking of whole content EVO-2519 Installer: it is possible select whether the Windows start menu entries will be created for all users EVO-2522 On reception of routing files the OFTP level of the destination will be taken into account, and if necessary transmission will be rejected with SFNA